top of page

Trevor Motorcycles: The Hard Truth About Building Bikes

3 minutes ago
5 min read
Jeroen-vincent Nagels - Trevor Motorcycles
Jeroen-vincent Nagels - Trevor Motorcycles

Nobody starts a motorcycle company expecting to spend years discovering what they got wrong. But that's part of the story behind Trevor Motorcycles.


Getting from its first electric motorcycle to the DTRe Vince wasn't the straightforward journey Trevor might have hoped for. There were lessons in engineering, technical partnerships and the realities of getting a new bike into production.


We spoke to Jeroen-vincent Nagels, director of Trevor Motorcycles and one of the two founders together with artist Philippe Stella, about what Trevor learned along the way, why it had to rethink its approach and what anyone thinking of building a motorcycle needs to know before taking the plunge.


The Stella: Lessons in Lightweight Design


Trevor DTRe Stella
Trevor DTRe Stella

Trevor set out to build an electric flat tracker with traditional motorcycle proportions and a modern electric drivetrain. The original DTRe Stella was developed with engineering and manufacturing support from Maison Saroléa, the Belgian company behind the Manx7 electric road bike.


The aim was an A1-compliant motorcycle with 11kW of rated power and considerably more peak power. Weight was a big part of the plan. At just 101kg, the Stella was exceptionally light, but achieving that weight meant using a relatively small 2.7kWh battery.


Looking back, Jeroen-vincent believes the pursuit of low weight pushed Trevor too far. The battery capacity was one of the compromises he now accepts was too ambitious:

"I have to take responsibility for being too optimistic in our pursuit of low weight. Agreeing to a 2.7 kWh battery was a compromise that ultimately proved too ambitious."

The battery wasn't the only headache. Trevor had also relied on its engineering partner to get the battery management system right.


"Saroléa never managed to deliver a reliable State of Charge indication, which made the actual remaining range unpredictable for our customers. And that's simply unacceptable."

Trevor DTRe Stella
Trevor DTRe Stella

The partnership with Saroléa had its shortcomings, but Jeroen-vincent also recognises that Trevor made its own mistakes. In particular, its pursuit of low weight led to compromises, including the decision to use a 2.7kWh battery.


The experience changed how Trevor viewed its relationship with the technology behind its motorcycles:


"Never compromise on the fundamentals of the riding experience, and never give up control over the technology that defines your product. There's an old saying: If you want something done right, do it yourself. It's a cliché, but in our case, it turned out to be true."


Starting again: The DTRe Vince


Trevor DTRe Vince
Trevor DTRe Vince

The Stella taught Trevor that chasing the lowest possible weight could come at the expense of other priorities for riders. With the Vince, Trevor took a more balanced approach. It was prepared to accept extra weight in return for more battery capacity and a motorcycle that was easier to ride.


The result was an entirely new motorcycle, rather than the more affordable version of the Stella Trevor had originally planned. It received a new frame, swingarm, battery system and drivetrain, with Trevor working with eRacing Denmark on the powertrain.


We covered the engineering changes and the Vince's journey into production in our earlier report: Trevor’s DTRe Vince Has Riders in Its Sights


Trevor DTRe Vince
Trevor DTRe Vince

One of the biggest changes was the powertrain. The new eRacing Denmark drivetrain delivers up to 30kW peak, although the output differs by market. The US version gets the full 30kW, while the European production Vince is limited to 20kW peak, with an 11kW rated output for A1 compliance.


Battery capacity has also taken a big step up. The Vince TT gets a 5.0kWh battery, almost double the Stella's 2.7kWh, while the base Vince will be fitted with a 3.5kWh battery.


More battery means more weight. The Stella weighed 101kg, compared with 125kg for the Vince TT. Trevor has also taken some of the edge off the handling, retaining the original bike's agility but making it easier to ride.



The prototype is the easy part


Trevor DTRe Vince
Trevor DTRe Vince

Jeroen-vincent describes building the first prototype as probably the easiest and most enjoyable part of the whole project. The hard work came from turning it into something that could be built repeatedly, delivered to customers and sold at a price people were prepared to pay.


For that stage, Trevor worked with Wido Veldkamp in the Netherlands, who helped industrialise the design and manufacture the first production batches.


"It's relatively easy to build an impressive one-off prototype. Building a motorcycle that stays true to that original vision, can actually be produced and delivered to customers, and makes commercial sense is an entirely different challenge."

That's when the reality of small-scale manufacturing started to bite.


"When you're producing relatively small quantities, finding the right balance between component quality, manufacturing costs and a competitive retail price is incredibly difficult."

Trevor DTRe Vince
Trevor DTRe Vince

Trevor also made a conscious decision about where it wanted to build its motorcycles. Rather than design a European motorcycle and outsource production to a lower-cost manufacturing country, Trevor wanted to use predominantly European components, with manufacturing and assembly taking place in the Netherlands and Denmark.


It's an admirable ambition, but it doesn't come cheap. Labour costs in Northern Europe are high, and a small manufacturer can't buy components or organise production on the same scale as the big players.


"Finding that balance between European craftsmanship, uncompromising quality and a price that makes sense in the real world was far more difficult than we had anticipated."

Getting the Vince into production was only part of the achievement. The bigger challenge is building a business that can keep producing motorcycles to the standard Trevor wants, at a price customers are prepared to pay. That's a very different test from building a prototype.


The BCB Take


Trevor DTRe Vince
Trevor DTRe Vince

The Stella gave Trevor some hard lessons, and Jeroen-vincent isn't trying to gloss over them. The company made compromises it shouldn't have, relied too heavily on outside technology and had to rethink what it wanted from the bike.


The Vince represents a substantial response. It's a new motorcycle, with a different drivetrain, more battery capacity and a revised approach to the riding experience. That doesn't make the Stella a bad motorcycle. It shows what can happen when a manufacturer is prepared to learn and change direction.


For anyone thinking about starting a motorcycle company, Trevor's experience offers a few valuable lessons. Don't sacrifice the fundamentals to chase an impressive number. Understand the technology you're relying on. And don't mistake building a prototype for having a production business.


Ride safe, folks.


Get the news that matters. Subscribe to our newsletter. It's free, no spam, just one email every Friday.



BCB FRIDAY NEWSLETTER

THE ELECTRIC MOTORCYCLE WORLD MOVES FAST.

WE MAKE SURE YOU DON'T MISS IT.

The week's biggest stories, delivered every Friday. No spam. Subscribe free.

BCBBIKECOMPARE

COMPARE ELECTRIC MOTORCYCLES. FIND THE BIKE THAT FITS YOU.

bottom of page